MB-22® E-Z Polish Kit is a premium polishing solution designed to deliver a flawless, high-gloss shine on marble and terrazzo surfaces.

Specially formulated for calcite-based stones, MB-22® E-Z Polish provides exceptional polishing performance while offering a safer application process compared to traditional polishing products.

Unlike other polishing powders, MB-22® E-Z Polish is designed to resist etching from splatter, making it an excellent choice for achieving a brilliant finish with reduced risk of surface damage. Trusted by professionals, this complete kit includes everything needed to polish and restore natural stone surfaces with confidence.

MB-22® E-Z Polish is backed by professional product support, quality ingredients, and rigorous testing to ensure reliable results for stone care specialists.

Key Features

• Premium polishing powder designed for marble and terrazzo surfaces.
• Specially formulated for calcite-based stones.
• Creates a brilliant, high-gloss finish.
• Will not etch surfaces due to polishing splatter.
• Safe and effective for a wide range of natural stones.
• Trusted by professional stone restoration specialists.
• Includes complete polishing accessories for easy application.
• Provides consistent results with proper technique.
• Product support and application guidance available.
• Made with high-quality ingredients and tested for performance.

Compatible Stone Applications

• Marble
• Granite
• Travertine
• Slate
• Quartz
• Limestone
• Terrazzo
• Other natural stone surfaces

What’s Included in the MB-22 E-Z Polishing Kit

✔ (1) 8 oz MB-22® E-Z Polish
✔ (1) 5-inch Drill Attachment with Pad Driver
✔ (2) 5-inch Hog’s Hair Pads
✔ (1) 5-inch White Pad
✔ (1) Easy Oxy Quart with Sprayer
✔ (1) Complete Set of Instructions

Common Applications

• Marble countertop polishing.
• Terrazzo floor polishing.
• Natural stone restoration.
• High-gloss finish restoration.
• Residential stone maintenance.
• Commercial stone care projects.
• Polishing calcite-based stone surfaces.
• Refinishing and enhancing stone appearance.
• Professional stone fabrication finishing.
• Edge, fixture, and detailed polishing applications.

Directions for Use

Preparation

• Mask and protect surrounding surfaces from splatter.
• Wear safety glasses and gloves before starting.
• Ensure the surface is free from:
  • Coatings
  • Waxes
  • Sealers
  • Grease
  • Dirt and debris

Application

• Use a variable-speed right-angle grinder/polisher with the included 5-inch drill attachment and pad driver.
• Apply approximately 1/3 oz of MB-22® E-Z Polish per 2–3 sq. ft. area.
• Add enough water to create a thick, wet paste that does not splatter.
• Place the product in the center of the working area.
• Maintain a wet paste consistency by adding water as needed during polishing.

Polishing Process

• Position the machine and hog’s hair pad directly over the polishing paste.
• Start slowly to distribute the product evenly.
• Apply light, consistent pressure.
• Polish using a slow machine speed for approximately one minute per square foot.
• Inspect the finish and repeat if additional shine is required.

Professional Tip

For polishing near edges, sinks, and tight spaces, use the white pad cut ½ inch larger than the pad driver. This provides additional protection around fixtures and improves polishing control.

Frequently Asked Questions (FAQ)

Q1. What is MB-22® E-Z Polish used for?
MB-22® E-Z Polish is used to create a high-gloss finish on marble, terrazzo, and other compatible natural stone surfaces.

Q2. What type of stones can MB-22® E-Z Polish be used on?
It is suitable for marble, granite, travertine, slate, quartz, limestone, terrazzo, and other natural stone surfaces.

Q3. Is MB-22® safe for calcite-based stones?
Yes. It is specifically formulated for calcite-based stones such as marble and terrazzo.

Q4. Will MB-22® E-Z Polish etch surfaces from splatter?
No. The formula is designed to prevent etching caused by polishing splatter, making it safer during application.

Q5. What is included in the MB-22® E-Z Polishing Kit?
The kit includes MB-22® polish, drill attachment with pad driver, hog’s hair pads, white pad, Easy Oxy quart with sprayer, and instructions.

Q6. How much MB-22® polish should be used?
Use approximately 1/3 oz per 2–3 square feet and adjust based on stone type and surface condition.

Q7. What pad should be used with MB-22®?
A hog’s hair pad is recommended for polishing, while the included white pad is useful for edges, fixtures, and final refinement.

Q8. Can beginners use the MB-22® E-Z Polishing Kit?
Yes, but proper technique is important. Professional guidance is recommended for best results on different stone types.

Q9. How long should the surface be polished?
A general guideline is approximately one minute per square foot using slow speed and light, even pressure.

Q10. Does stone type affect polishing results?
Yes. Different stones may require adjustments in powder quantity, water level, machine speed, and polishing technique.