Ultra 5 Polishing Powder is a premium Italian-crafted polishing compound designed to deliver a superior high-gloss finish on calcite-based natural stones, including marble, travertine, onyx, and limestone.

Developed with a fine-grained formula, Ultra 5 provides fast polishing action while achieving exceptional clarity and depth without staining grout lines.

Unlike traditional 5X polishing powders, Ultra 5 exceeds industry standards by offering faster results, smoother polishing performance, and a refined finish on demanding stone surfaces. Ideal for professional restoration and maintenance applications, Ultra 5 helps technicians achieve consistent, high-quality results on both floors and countertops.

Key Features

• Premium Italian-crafted polishing powder for professional stone finishing.
• Specially formulated for calcite-based stones such as marble, travertine, onyx, and limestone.
• Produces a deep, high-gloss polish quickly and efficiently.
• Fine-grained formula provides superior clarity and surface refinement.
• Does not stain grout lines during application.
• Outperforms traditional 5X polishing powders.
• Suitable for both floor and countertop polishing applications.
• Provides consistent polishing results with excellent surface brightness.
• Coverage: approximately 125–200 sq. ft. per pound, depending on stone type.
• Recommended to test on a small, inconspicuous area before full application.

Common Applications

• Marble floor polishing and restoration.
• Travertine polishing and maintenance.
• Limestone surface refinement.
• Onyx polishing applications.
• Natural stone countertop polishing.
• Professional stone restoration projects.
• High-gloss finish restoration.
• Residential and commercial stone maintenance.
• Final polishing after honing processes.
• Natural stone fabrication and finishing.

Directions for Use

Preparation

• Hone the stone surface to the highest clarity possible before polishing.
• Protect surrounding surfaces from splashes and slurry using proper masking materials.
• Different stones may require different polishing techniques; testing is recommended before full application.

Floor Application

• Work in a 10–15 sq. ft. area.
• Apply 1.5–2 oz. (3–4 tablespoons) of Ultra 5 powder in a circular pattern smaller than the floor machine diameter.
• Place a hog’s hair pad over the powder.
• Use a floor machine with:
  • Minimum 1.5 HP motor
  • Maximum speed of 175 RPM
• Release water and distribute the slurry evenly by moving the machine back and forth.
• Maintain a thick slurry consistency; avoid making it too wet.
• Polish using a spiral motion for approximately 2.5–4 minutes.
• Check the surface with a squeegee; a high polish should be visible.
• Rinse with clean water, vacuum the slurry, and clean with a neutral stone cleaner such as MB-1 Floor Amore or MB-15 StoneGlow.
• Repeat the process on the next section.

Countertop Application

• Work in a 3–4 sq. ft. area.
• Apply approximately ½ teaspoon of Ultra 5 powder.
• Spray water onto the powder and surrounding surface.
• Set a variable-speed right-angle polisher to the lowest speed setting.
• Use a hog’s hair pad with slow movement and steady pressure.
• Polish for approximately 2–3 minutes.
• Check results and adjust as needed.
• Semi-flush the area, pull the slurry toward the next section, and repeat the process.

Frequently Asked Questions (FAQ)

Q1. What is Ultra 5 Polishing Powder used for?
Ultra 5 is used for polishing calcite-based stones including marble, travertine, onyx, and limestone to achieve a deep, high-gloss finish.

Q2. What makes Ultra 5 different from traditional 5X powders?
Ultra 5 features a fine-grained Italian formula that provides faster polishing, improved clarity, and a higher-quality finish compared to traditional 5X powders.

Q3. Can Ultra 5 stain grout lines?
No. Ultra 5 is specially formulated to polish stone surfaces without staining grout lines.

Q4. What stone types can be polished with Ultra 5?
It is ideal for marble, travertine, onyx, limestone, and other calcite-based natural stones.

Q5. How much coverage does one pound of Ultra 5 provide?
Coverage is approximately 125–200 sq. ft. per pound, depending on the stone type and polishing conditions.

Q6. Can Ultra 5 be used on both floors and countertops?
Yes. It is designed for professional polishing applications on both natural stone floors and countertops.

Q7. What type of pad is recommended with Ultra 5?
A hog’s hair pad is recommended for both floor and countertop applications.

Q8. Should I test the product before full application?
Yes. Always test Ultra 5 on a small, hidden area first to confirm compatibility and desired results.

Q9. What machine speed is recommended for floor polishing?
Use a floor machine operating at 175 RPM maximum with a minimum 1.5 HP motor.

Q10. How long should Ultra 5 be worked on the surface?
For floors, polish approximately 2.5–4 minutes per section. For countertops, check results after approximately 2–3 minutes and repeat as needed.