MB-11® Touch Up is a specialized polishing powder designed for spot restoration of water stains, rings, and dull areas on polished marble, travertine, and other calcite-based natural stones.

This unique blend of fine abrasives and polishing catalysts makes stone restoration simple and effective without requiring power tools.

Ideal for lighter-colored calcite stones, MB-11® Touch Up restores damaged areas to a brilliant polished shine while helping maintain the natural beauty of the stone surface. Its easy hand-application process makes it suitable for homeowners, maintenance professionals, and stone restoration specialists.

Note: All powders are packed by weight, not volume.

Key Features

• Specialized polishing powder for calcite-based natural stones.
• Designed to restore water stains, rings, and light surface damage.
• Helps restore the original polished shine of marble and travertine.
• No power tools required—simple hand application.
• Contains a unique blend of abrasives and polishing catalysts.
• Ideal for spot repairs and small restoration areas.
• Best suited for lighter-colored stones.
• Provides a professional polished finish with minimal effort.
• Suitable for marble, travertine, and other calcium-based stones.
• Designed for stone care professionals and restoration specialists.

Coverage

Coverage depends on the size and severity of the damaged area. MB-11® Touch Up is designed for spot restoration and small-area polishing rather than large surface applications.

Common Applications

• Removing water stains from polished marble.
• Restoring ring marks on stone countertops.
• Touching up dull spots on travertine surfaces.
• Polishing light-colored calcite-based stones.
• Repairing minor surface imperfections caused by moisture or spills.
• Restoring shine to polished natural stone surfaces.
• Residential stone maintenance.
• Commercial stone care projects.
• Professional marble and travertine restoration treatments.

Ideal For

• Marble
• Travertine
• Limestone
• Calcite-based natural stones
• Other calcium carbonate-based polished stones

How to Use

Surface Preparation

• Always test the product on a spare tile or small hidden area before full application.
• Ensure the stone surface is clean and free from loose dirt or debris.
• Wear rubber gloves when handling the product.

Application

1. Apply approximately 1/8 teaspoon of MB-11® Touch Up powder directly onto the affected area.
2. Mist the powder with water using a spray bottle, or add a few drops of water to create a wet paste.
3. Using a clean, slightly damp white cotton cloth, rub the affected area until the powder dries.
4. Repeat the process if necessary until the desired results are achieved.

Professional Finishing Process

• Mist the area again with water after the initial polishing.
• Use the same clean white cotton cloth to buff the surface in circular motions with light pressure.
• Follow with quick back-and-forth motions using increased pressure.
• Continue buffing until the stone becomes dry and polished.

Residue Removal

To remove any remaining residue:

• Clean the surface with MB-5 Stone & More Multi-Surface Spray Cleaner.
• Ensure the surface is completely clean before final inspection.

Seal Your Stone – The Water Test

1. Pour approximately one tablespoon of water onto the stone surface.
2. Allow the water to remain for 10–15 minutes.
3. Check the appearance of the stone after removing the water.

Water Test Results

• If the stone looks unchanged, sealing is not required.
• If the area becomes darker, sealing is recommended.

For additional protection after polishing, use MB-24 Barrier.

Important Notes

• Always perform a test area before full application.
• Best results are achieved on lighter-colored calcite-based stones.
• Do not use outside the recommended stone types.
• Results may vary depending on stone composition, stain severity, and surface condition.
• Use only clean white cotton cloths to prevent scratching or color transfer.
• Powder measurements are based on weight, not volume.

Frequently Asked Questions (FAQ)

Q1. What is MB-11® Touch Up used for?

MB-11® Touch Up is used for spot polishing and restoration of water stains, rings, and dull areas on polished marble, travertine, and other calcite-based stones.

Q2. Does MB-11® Touch Up require power tools?

No. MB-11® Touch Up is designed for hand application and does not require polishing machines or power tools.

Q3. What stone types can MB-11® Touch Up be used on?

It is suitable for marble, travertine, limestone, and other calcite-based natural stones, especially lighter-colored varieties.

Q4. Can MB-11® Touch Up remove water stains?

Yes. It is specifically designed to restore areas affected by water stains, rings, and light surface dullness on polished calcite stones.

Q5. How much product should be applied?

Approximately 1/8 teaspoon of powder should be applied to the affected area for each treatment.

Q6. How is MB-11® Touch Up applied?

The powder is mixed with a small amount of water to create a wet paste and rubbed with a clean damp white cotton cloth until the surface is polished.

Q7. Can MB-11® Touch Up be used on dark stones?

MB-11® Touch Up is best suited for lighter-colored stones. Testing on a small hidden area is recommended before use.

Q8. Should stone be sealed after using MB-11® Touch Up?

A water test should be performed after polishing. If the stone darkens when exposed to water, sealing is recommended.

Q9. What sealer can be used after polishing?

MB-24 Barrier can be applied after polishing to provide additional protection for the stone surface.

Q10. Why choose MB-11® Touch Up?

MB-11® Touch Up provides an easy, professional-grade solution for restoring the shine of polished calcite-based stones without requiring specialized equipment. It helps bring back the natural beauty of marble, travertine, and other calcium-based stone surfaces.